A feature list for extending a gasifier design tool: velocity checks, tar dew point, fluidization, oxygen safety, syngas ratios and heat and mass balance.
Add: 1) how can we say that calculated velocity is correct and it is desired by gasifier. give remarks to check the max and min velocity and then show the criteria pass. 2) Tar loading and tar dew-point study 3) Fluidization calculation for BFB/CFB: Umf, terminal velocity, particle PSD, distributor pressure drop. 4) Oxygen safety study, inerting and purging calculation 5) Methanol synthesis gas ratio simulation and loop purge/compression study. 6) carbon conversion, turndown calculation performance, efficiency 7) I have Biomass Proximate Analysis and Ultimate analysis, how it helps 8) It must ask me which type of gasifier and when i select, it must show me detailed calculations and heat mass balance for that gasifier. 9) It must ask me comparison between which gasifiers and once i ticked, it shows that in the summary sheet only not on the front page.
添加以下功能： 1) 我们如何判断计算出的速度是正确的，并且是气化炉所期望的？请给出用于检查最大和最小速度的备注，然后显示是否满足标准。 2) 焦油负荷和焦油露点研究 3) 鼓泡流化床（BFB）/循环流化床（CFB）的流化计算：最小流化速度（Umf）、终端速度、颗粒粒径分布（PSD）、分布器压降。 4) 氧气安全研究，惰化和吹扫计算 5) 甲醇合成气比例模拟及循环排放/压缩研究 6) 碳转化率、可调范围（turndown）计算性能、效率 7) 我拥有生物质的工业分析（Proximate Analysis）和元素分析（Ultimate analysis），这些数据如何帮助设计 8) 工具必须询问我使用哪种类型的气化炉，当我选择后，必须为我显示该类型气化炉的详细计算以及热量和物料平衡。 9) 工具必须询问我需要对比哪些气化炉类型，一旦我勾选，仅在摘要表中显示对比结果，不在首页显示。